Specification
Smooth Galvanised steel carcass painted RAL9006 (Light grey) with full width shelf to the rear corners of each compartment from the locker from door opening.
Smooth Galvanised Carcass (body) with reduced radius corners gives full width shelf to back of locker. Smooth Galvanised steel shelves, fixed firmly into position adding rigidity to the locker.
Features
- Doors 10mm Solid grade laminate with smooth edges
- Plant on door for flush finish with no frames visible.
- Doors Colours from our standard colour range (other colours available upon request)
- No Gaps between each locker when assembled in runs.
- Designed and engineered door frames manufactured from extruded aluminium profiles
- Extra Heavy duty unique self-closing sprung hinges with stainless steel pin for automatic door closing
- Engineered hinges allowing doors to open to 105 degrees in line with the locker body to prevent the door opening across the adjacent compartment
- We have a chosen range of quality engineered standard locks suitable for wet and dry applications.
- Other locks can be supplied and designed to suit your requirements upon request.
- All lockers are supplied fully assembled in nests of one – for nesting side by side with no visible gaps.
Optional Extras
Sloping Tops
Sloping tops are a good way of preventing litter, bags and other items being left on top of the lockers. The sloping top also makes cleaning easier. Sloping tops are essential in hygiene – sensitive applications such as the NHS or food preparation.
Locker support stands
Locker support frames raise lockers off the floor, reducing impact damage and making cleaning easier. Manufactured from 25mm square tube section an all welded construction and are painted RAL7035 light grey as standard for dry areas. Wet area versions are zinc plated prior to painting. Standard height is 150mm with 25mm adjustable feet, rear legs are inset by 25mm to accommodate skirting. The stands are manufactured in widths and depths designed to match the locker installation.
Locker stand plinths
Locker stand plinths are manufactured for wet areas using 10mm Solid grade laminate to match the locker doors. The plinths are manufactured in widths to suit each locker or designed to match the locker installation runs. They are manufactured to fit onto locker support stands.
Seat / Stand Support Frames
Support Frame with seat units are incorporated into the locker frame as well as slatted seats / Solid seats to the front. They can include a mesh shelf for footwear. Standard height is 400mm to match freestanding bench seating units. Seats are 300mm deep in lengths to suit locker layout. Standard seat slats are 22mm thick Utile hardwood, American Oak, Beech or Ash for dry areas. Wet area slats are 10mm Solid Grade Laminate in choice of colours.
Seats with full depth lockable mesh lockers beneath – to store bags, kits or boots
Full locker depth, fully welded, extra heavy duty Trojan mesh lockers, complete with hasp and staple locks (suitable for padlocks – provided by other) are manufactured complete with seating to the front. Depth of seating is nominally 300mm, standard height is 400mm (or height required to store full kit bags). Manufactured in lengths to suit locker layouts.
Dry area seating slats are manufactured from hardwood utile, American oak, beech or ash in standard sizes of 22mm thick x 75mm wide x lengths to suit layouts. For wet areas seating slats are manufactured from 10mm Solid Grade Laminate, x widths & lengths to suit layouts. One-piece Solid Grade Laminate seating can be manufactured with routers to give the effect of slats if required (POA).
End panels to match the doors
End panels can be manufactured to add on to the end of locker runs or to the side of each individual locker if required.
They are manufactured from 10mm Solid Grade Laminate with smooth radius edges in the same colour to match locker doors. Contrasting colours may also be order if required to match your room decors.
Sizes: Single : 1803mm high x 450mm deep
Double to suit lockers only, back to back: 1803mm high x 900mm deep.
Single to suit lockers on stand: 1953mm high x 450mm deep.
Double to suit lockers back to back on stand: 1953mm high x 900mm deep.
Solid Grade Laminate Specifications
Sheet Sizes
• 10mm – 3660 x 1610mm and 3050 x 1300mm (Generally used for doors)
• 6mm – 3660 x 1610mm (Generally used for carcasses)
General Information
The locker collection is manufactured in the most modern and largest HPL factory in Europe and conforms to all the requirements of BS EN438:2. The sheets offer a hardwearing, impact resistant and very attractive decorative surface.
The range is available in a selection of plain colours with complementary speckle and patterned effects and woodgrain finishes. The HPL has been specially selected for applications in areas of heavy usage or vandalism.
The compact grade HPL is a durable, versatile and economic product resistant to vandalism, impact and water. Its decorative surface with an easy-to-clean texture is enhanced by the solid black core offered as a standard feature of this collection. Its 10mm thickness ensures that the HPL can be used in conjunction with the majority of available fittings and fixing systems.
Cleaning & Maintenance
The locker collection will give years of excellent service provided a few simple rules are followed:
Light dirt or stains can be removed easily with warm water and mild detergent. Stubborn marks should be removed using a non-abrasive cream cleaner or mild domestic bleach. Harsh abrasives or scouring powders should be avoided. Grease marks can be removed with a proprietary paint and graffiti remover. Hair dyes, bleaches, caustic alkalis and strong mineral acids should be wiped off within a short period.
We strongly recommend that all products are stored, conditioned and fabricated in accordance with our own and BLFA guidelines.
More detailed technical information brochures are available to download below or from our office and/or your local distributor.
Download PDF – Abet Laminati
Download PDF – Greenlams
Download PDF – Polyrey
Download PDF – Arpa
Standard stock colours are illustrated on the PDF downloads, other colours available upon request.
Door Configuration
- Single door lockers (complete with hat shelf as standard)
- Two door lockers
- Three door lockers
- Four door lockers
** Other door lockers available upon request
** Other additional internals available upon request